Skip to content
Local craftsmanship. Personal contact.
Rot-damaged timber

Timber rot repairs in Hobro and Viborg

A decaying cladding board or damp timber around a window can be worrying. Hvilsom Tømrer og Snedkerforretning ApS helps with rot-damaged timber in homes and holiday homes in Hobro, Viborg and relevant parts of North and Central Jutland. Our base and workshop are in Hvilsom.

40+years of carpentry experience with Arne

Arne & Frederik Albertsen

Owners & Master CarpentersGet to know the company
The extent of the damage and moisture source are investigated before repairs
Partial or complete replacement based on the timber's condition and role
Particular attention to concealed and load-bearing timber
Timber rot repairs

From signs of rot to an agreed repair

Short answer

Can rot-damaged timber be repaired, or does it need replacing?

Rot-damaged timber can sometimes be repaired by replacing the affected section, while more extensive damage may require replacement of the entire building component. The choice depends on the extent of the damage, the timber's role and the cause of the moisture, which must be investigated before repairs. The price depends on the specific job and is clarified following an assessment.

Get a price for your own project

Signs that your timber needs checking

Soft, frayed or crumbling timber can be a sign of rot. Damp patches, discolouration and staining are also reasons to take a closer look, although discolouration alone does not establish that timber is rotten.

Pay attention to timber around windows, cladding and roofs, particularly where water has entered before. A musty smell may indicate a moisture or fungal problem in concealed areas, but it cannot establish the cause or extent on its own.

Establish the moisture source and extent first

The visible area does not necessarily show the full extent of the damage. Before repairs, it is therefore important to assess whether adjacent or concealed parts are also affected. By agreement, part of the structure may need to be opened up to continue the investigation.

Moisture may come from leaks in the roof or façade, for example, or from condensation within the structure. The Danish Building Regulations' moisture requirements include preventing damage from water and moisture and protecting the building envelope against rain. The chosen solution therefore needs to address why the timber became wet, rather than simply covering up the damage.

Keep sound timber or replace the whole component?

If the damage is localised, it may be possible to retain sound timber and replace the affected section. More extensive decay may require replacement of an entire building component. We assess the options based on its condition and the timber's role in the building.

Rot in beams, rafters or other load-bearing timber can affect structural safety and requires a professional assessment. Do not remove or cut into suspected load-bearing timber yourself. Suspected wood-decaying fungi may require specialist investigation or testing; simply replacing visibly damaged timber does not necessarily establish the extent or nature of a fungal attack.

Tell Frederik where the damage is

Describe where the timber is affected, what you have noticed and whether there has previously been damp or water ingress. Include the property's location. Photos showing both the wider area and the damage itself can help with the initial conversation if you have them; they cannot establish the full extent on their own.

Use the contact form and Frederik will call you to clarify the work and price. You can also call Frederik directly on 21 71 90 72, call the company on 98 54 84 15 or email frederik@hvilsomts.dk. The workshop is at Søhalevej 8, 9500 Hobro, in Hvilsom.

How we approach your project

From the first conversation to the next step

01

1. Describe the damage

Contact us with the property's location, a description of the problem and photos if you have them. Frederik will discuss the initial questions with you.

02

2. Investigate and assess

We agree how to investigate the timber's condition, the moisture source and the extent of the damage. Any need to examine concealed areas or arrange further professional investigation is clarified as the assessment progresses.

03

3. Agree the repair

Based on the assessment, we discuss the options for repair or replacement and how to address the moisture source. The scope and price are agreed before work begins.

Good to know

Questions about timber rot repairs

Have a question about your own project? Call or email us.

How much do timber rot repairs cost?

The price depends on factors including the extent of the damage, access to the timber and the work needed to address the moisture source. Concealed damage can change the scope. Contact Frederik to clarify what needs investigating and how the price can be established.

Can I just paint over the damaged timber?

Paint does not restore the strength of decayed timber or resolve an underlying moisture source. The timber's condition and the cause of the damage should be assessed before deciding on repairs and a surface finish.

Does rot mean the whole window or cladding needs replacing?

Not necessarily. If the damage is localised and the remaining timber is sound, partial replacement may be an option. More extensive damage or the component's function may make a larger replacement necessary.

What should I do if I suspect rot in load-bearing timber?

Arrange a professional assessment and do not cut into or remove the suspected timber yourself. Visible signs alone cannot show how much strength the structure has lost or how far the damage extends. Signs of fungal attack may require further specialist investigation.

Can you assess the damage from photos?

Photos can help with an initial discussion, but they do not show the timber's condition inside the structure. Include them with the property's location and a description of the problem if you have them. We can then agree whether a site visit or more detailed investigation is needed.

From your idea to a clear price

Get a price for your timber rot repairs

Tell us where the work is needed and what you would like done. When you submit the form, Frederik will call you to discuss the details and give you a price for the work.

You are also very welcome to call

Have the first conversation directly with Frederik.

21 71 90 72
  • A brief description is enough to get started
  • You receive a call — no automated price calculation
  • Skip optional questions if you are unsure

Tell us about your project — we will call you

What can we help with?
Have more details? Add them here (optional)

Where is the damaged timber, and what signs have you noticed? Approximate scope and known moisture issues are useful. Do not open or remove structural elements just to describe the work.

Where is the work needed?
How can Frederik reach you?
Personal contact

You are very welcome to call us directly

Hvilsom Tømrer

Based in Hvilsom
Søhalevej 8, 9500 Hobro
CVR 20606835

98 54 84 15

Arne Albertsen

Owner & Master Carpenter

20 44 84 15arne@hvilsomts.dk

Frederik Albertsen

Owner & Master Carpenter

21 71 90 72frederik@hvilsomts.dk